Quick Commissioning With The Bop-2 - Siemens SINAMICS G120C Compact Operating Instructions

4.2.1

Quick commissioning with the BOP-2

Starting quick commissioning
Preconditions
● The power supply is switched on.
● The operator panel displays setpoints and actual values.
Procedure
Proceed as follows to carry out quick commissioning:
Press the ESC key.
Press one of the arrow keys until the BOP-2 displays the "SETUP" menu.
To start quick commissioning, in the "SETUP" menu, press the OK key.
If you wish to restore all of the parameters to the factory setting before the quick
commissioning, proceed as follows:
1. Press the OK key.
2. Switchover the display using an arrow key: nO → YES
3. Press the OK key.
When you select an application class, the inverter assigns suitable default settings to the
motor control:
● STANDARD
● DYNAMIC
● EXPERT
This procedure is described in the operating instructions
SINAMICS G120C, FSD ... FSF inverters
Compact Operating Instructions, 11/2016, FW V4.7 SP6, A5E39339884B AA
Standard Drive Control (Page 45)
Dynamic Drive Control (Page 47)
Overview of the manuals (Page 86)
4.2 Commissioning with BOP-2 operator panel
Commissioning
43