Charging The Lithum Battery Of Drone - Holystone HS110 Instructions For Use Manual

< CHARGING THE LITHIUM BATTERY OF DRONE >
1. Balanced charging: Make sure the battery is connected to the drone,
insert the USB charging cable into USB
then, connect the USB charging cable to the charging port on the drone.
The indicator light on the power switch will turn red when charging and
turn off when the battery is fully charged.
2. Charging time: about 60-90 Minutes
1) Don't use or charge the battery if it shows signs of swelling, punctures,
or is damaged in any way.
2) Don't charge the battery directly after use, allow it to cool down in an
open and dry area to insure overheating does not occur.
3) During charging, please stay the battery away from furniture, carpet
or anything flammable.
4) Don't charge the battery overload(below 5V/2A). Make sure to remove
the battery from the charger after charging is complete, never
overcharge the battery.
5) Be cautious while removing a battery from the charger, it's possible to
strip the cords that could lead to a fire( and ruin the battery)
CAUTIONS
adapter(
5V/0.5-1.0A recommended
Red
Indicator
6
),