Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Beyond Real Z CAM S1
Summary of Contents for Beyond Real Z CAM S1
- Page 1 CAM™ User Manual (Draft) v1.0...
-
Page 2: Camera Introduction
1. CAMERA INTRODUCTION LED Indicator Status • Green: When the camera is turned on with SD card in the slot. • Red: When the camera is turned on but no SD card in the slot or the SD. • Flashing Green: When the camera is recording, LED indicator will flash every second. •... -
Page 3: Power On / Off The Camera
2) Connect the DC power plug of the power adapter to the DC power adapter socket of Z CAM S1. Note that Z CAM S1 will be turned on whenever the DC power adapter socket is connected to power source. - Page 4 Then pull up the Safety latch, mount it onto the Main camera unit and lock it properly. 4) Press and hold Power button to turn on Z CAM S1. Power off camera To power off the camera, long-press the Power button until the LED indicators are off.
-
Page 5: Camera Reset
Ethernet Connection (to Computer) 2.3. With Ethernet connection to a computer (PC/Mac), you can control the camera and download files with Z CAM™ Controller (4. CAMERA CONTROL), and do live streaming with Z CAM™ WonderLive (5. LIVE STREAMING, PC only) There are 2 ways of connection: Direct Mode &... -
Page 6: Before Recording
3. RECORDING 3.1. Before Recording Please do the following check before recording: 1) Format SD cards with Z CAM™ Controller on a PC (4. CAMERA CONTROL). 2) Make sure the camera is in a horizontal position. 3.2. Start / Stop Recording 1) Press the Record button to start recording. -
Page 7: Connect To The Camera
4.1. Connect to The Camera 1) There will be a pop-up window to scan the camera when the software is open, with list of the camera which is connected to the computer. 2) Select the camera you want to control, then double click the name of the camera or click “Choose”... -
Page 8: File Manager
4.3. Recording 1) Click the Record button on the main window to start recording, there will be red dot flashing at the left-top of the live view window. Time of recording will be showed on the top of record button. 2) Click the Stop button to stop recording. -
Page 9: Camera Settings
button to download the files from the camera. It will jump to Downloading window to show the progress of download. 4.5. Camera Settings There are 3 tabs on the right of the main window including: Settings, White Balance, Exposure, which you can change the settings of the camera*. Please check the User Manual of Z CAM Controller for more details. - Page 10 6. VIDEO STITCHING (with Z CAM™ WonderStitch) Please check User Manual of Z CAM™ WonderStitch for the detail of video stitching, which you can download from the website: http://www.z-cam.com/controller/ 7. FIRMWARE UPGRADE (with Z CAM™ Controller) Please follow the steps as below to upgrade the firmware of the camera: 1.
-
Page 11: Camera Maintenance
upgraded correctly. Please follow the instructions above and don’t stop Z CAM Controller before the upgrade is finished. If you are not familiar with computer operation, please DO NOT upgrade the firmware by yourself. It’s under your own risk to upgrade the camera and Z CAM will not be responsible for any damage to the camera or the computer by incorrect operation.
Need help?
Do you have a question about the Z CAM S1 and is the answer not in the manual?
Questions and answers