Page 1
PDF file from the product support section of www.iSimple.com, or consult the User Manual section of the TranzItBLU HF application installed on a compatible mobile device. Page 1...
Page 2
Tranzit BLU HF Installation Videos Available iSimple.com Visit us on Facebook https://www.facebook.com/isimplesolutions Page 2...
TranzitBLU HF Table of Contents 1. Introduction 2. Contents 3. Installation Microphone II. Control Button III. Wiring IV. DIP switch Configuration V. LED functions / meanings 4. Phone Setup Bluetooth Pairing II. Smartphone Application 5. User Operation Controlling your Smartphone via the Tranzit BLU HF 6.
Tranzit BLU HF 1. Introduction Thank you for purchasing the iSimple ISFM2351 as your smartphone connection solution. TranzIt BLU HF uses a Bluetooth connection to provide increased safety and entertainment. Answer incoming calls or launch VR to access your smartphone’s functions at the press of a button, without handling your phone.
TranzitBLU HF General connections: Power connections: 1. Red wire – Connect to 12V + ACC (switched power) 2. Black wire - Connect to chassis GND Control Button connections: 1. Pink wire - Connect control button Pink wire to ISFM2351 Pink wire 2.
Tranzit BLU HF V. LED Info The ISFM2351 has a 3-color LED inside the module, which can be viewed through the hole on the rear of the metal housing. The Red, Green and Blue LED has several modes that provide feedback on the current status of the interface. Blinking Red: The module is trying to reconnect with a device in the paired devices list.
Page 7
Modes and Control Button Operation PAIR YOUR FIRST PAIR PHONE (new INCOMING CALL STREAMING ADDITIONAL DURING CALL TranzitBLU HF or (phone ringing) MUSIC PHONES after reset) Discoverable KEY ON, NO BUTTON PRESS (pairing) Mode Next Track or Play TAP BUTTON...
Verify the location of the microphone is unobstructed. Issue: Control button does not function Resolution: Verify that both the Pink and Black wires from the button are properly connected to the Pink and Black wires from the TranzitBLU HF. Reference section 3 for Installation information. Page 8...
Page 10
Tranzit BLU HF “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards.
TranzitBLU HF Warranty Information One Year Limited Warranty The quality controls used in the manufacture of this product will ensure your satisfaction. This warranty applies only to the original purchaser of this product from an authorized iSimple ® dealer. This warranty covers any supplied or manufactured parts of this product that, upon inspection by iSimple ®...
Need help?
Do you have a question about the TranzitBLU HF and is the answer not in the manual?
Questions and answers