Advertisement
Quick Links
Advertisement
Summary of Contents for De Agostini Sky Rider Drone
- Page 1 Pack 04 www.model-space.com...
- Page 2 The use of Sky Rider Drone for purposes of monitoring or spying is strictly which Sky Rider Drone flies. De Agostini also points out that it is not permitted to use Sky Rider prohibited and may be punishable by law.
- Page 3 Assembly Guide Stage 14 Straps for the battery case Fixing the two straps for the battery case. Your parts 1. Chassis 2. 8 M3 nuts 3. Allen key 2.5mm 4. 3 screws M2 x 6mm 5. 3 screws M2 x 12mm 6.
-
Page 4: Assembling The Body
Stage 15 Assembling the body Fixing the undercarriage and the chassis together. Your parts 1. Propeller 10 x 4.5 inches CCW (counter-clockwise) You will need For this stage’s assembly, you will need the undercarriage bar (from Stage 4), the chassis (to which you attached the straps in Stage 14), four M3 x 12mm screws (from Stage 4) and four M3 nuts (Stage 14). - Page 5 Assembly Guide The first two nuts Orientating the nuts In this photo, you can The four M3 nuts are see the first two M3 put in place on the left nuts placed in their side of the chassis. Ensure that the nuts sockets on the left side are the right way up of the chassis.
- Page 6 Tighten the screws Tighten the M3 x 12mm screws using the 2.5mm Allen key from Stage 14. Tighten the screws clockwise. Do this for all four M3 x 12mm screws on the left side. Useful comparison This is a view from the inside of the chassis.
- Page 7 Assembly Guide Stage 16 The first electronic speed control The first ESC – electronic speed control – is fixed temporarily to the chassis with tape. Your parts 1. Electronic speed control Adhesive tape The ESC is provided with this stage. Fix it temporarily to the chassis using a piece of double-sided tape.
- Page 8 Stage 17 Back left arm cover In this stage, we fix the bottom red cover to the back left arm. Your parts Back left arm 1. Top rotor arm cover You fitted LED lights 2. Bottom rotor arm cover to the back left arm in Stage 12.
- Page 9 Right side of the body With its Pininfarina design, the Sky Rider Drone has an unmistakable elegance and its lightweight PVC body is robust and flexible. The right side of the drone body displays the prestigious Pininfarina logo.
- Page 10 For future assembly From Stage 1 Screw M5 x 16mm and M5 nut, which attaches the arm to the chassis. Red cover for the front left arm. Four M2 x 6mm screws. From Stage 3 Eight M2 x 12mm screws (two groups of 4) to secure the arm hinges to the body.
Need help?
Do you have a question about the Sky Rider Drone and is the answer not in the manual?
Questions and answers