Before Setup - Dell VRC100-L User Manual

FIRST RUN EXPERIENCE
CONNECTING YOUR CONTROLLER
The first run experience will guide the user through powering on and connecting the controller. It's also
possible to power on and connect the controller through the native Bluetooth page in Windows
Settings.
BEFORE SETUP
Before pairing, you will need:

Two VR CONTROLLERs.

Batteries for the controllers. Each controller takes two AA batteries.

A Bluetooth dongle (if your machine doesn't support Bluetooth).
PAIRING YOUR CONTROLLERS FOR THE FIRST TIME
1. Choose one of the controllers to pair. We'll run through this process for each controller.
2. Turn the controller on by pressing the Windows button for 2 seconds. You should see the LEDs
on the constellation flash and device vibrate, indicating that the device is on.
3. Go to Settings ‐> Devices ‐> Bluetooth and other devices.
4. Remove old controllers, if necessary. If you've already paired a different controller in the past,
remove it by clicking on the controller that appears in the panel and choosing 'Remove Device'.
5. Pairing Your Device
2