Related Manuals for ELCOS VAR-201
Summary of Contents for ELCOS VAR-201
- Page 1 LINEAR ACTUATOR VAR-201 TYPE • DASHBOARD AND REMOTE CONTROL • VARIABLE DISTANCE ® PARMA ITALY Tel. +39 0521/772021 Fax +39 0521/270218 GB VAR-201/1 E-mail: info@elcos.it - HTTP://www.elcos.it...
- Page 2 LINEAR ACTUATOR TYPE VAR-201 Used to command a diesel engine accelerator. NOTICES Warning: adhere closely to the following advice: - Be sure to correctly connect the conductors leaving the actuator - When making connections always follow the enclosed circuit diagram...
- Page 3 ATTACHMENT TO ACCELERATOR CONDENSATION DISCHARGE HOLES magnetic cam GREEN LIGHT on electronic limit switch NOTE CONDENSATION DISCHARGE HOLES NEVER mount the actuator with the condensation discharge holes facing up or to the side, water or particles could enter. GB VAR-201/1...
-
Page 4: Examples Of Mounting
Move the magnetic cam towards the electronic limit switch until the green indicator lights up, then tighten the magnetic cam screw. By returning the ignition key to zero, the actuator will return the accelerator lever to the minimum. Repeat the operation. GB VAR-201/1... - Page 5 Move the magnetic cam towards the electronic limit switch until the green indicator lights up, then tighten the magnetic cam screw and reaccelerate. By returning the ignition key to zero, the actuator will return the accelerator lever to the minimum. Repeat the operation. GB VAR-201/1...
-
Page 6: Actuator Mounting
TIGHTEN THE SCREW OF THE CABLE-GRIP CLAMP TO A TORQUE VALUE OF 0,3 Kg.m (3N.m) DO NOT MOUNT THE ACTUATOR WHERE ITCOULD BE SUBJECTED TO KNOCKS OR STRONG VIBRATIONS. DO NOT MOUNT IN A WAY THAT COULD CREATE DANGEROUS SITUATIONS. GB VAR-201/1... -
Page 7: Technical Data
-10 ÷ +50 °C - DEGREE OF PROTECTION IP 32 - WEIGHT 1 150 g - SPEED AT NOMINAL VOLTAGE 15mm/s ± 1 mm/s (60 mm in 20 SEC.) DIMENSIONS CABLE LENGTH 1,5 m 19.6 36.3 170.7 285 ÷ 345 GB VAR-201/1... -
Page 8: Ordering Data
Steel wire Code 40260199 CONFORMITY DECLARATION The company Elcos s.r.l. assumes full responsibility for declaring that the equipment: VAR-201 type: Installed and used in the ways and for the purposes described in the instruction and user manual, is in conformity with the following...