Chapter 2 Preparations
1.23
Dust Proof Bezel with Sensor
The following dust proof bezels can be attached to this server.
•
N8146-91 Dust Proof Bezel with Sensor
1.23.1
Installing Dust Proof Kit
1. Stick a nameplate on the flat face of the dust-proof bezel lower part.
2. Push the dust proof cover as shown in figure below, and remove the dust proof cover.
132
Note
The outer dimension after Dust Proof Kit is attached is as follows.
200.0 mm (width) X 613.5 mm (depth) X 438.0 mm (height) (projection excluded)
①
①
Express5800/T120g User's Guide
1. Installing Internal Optional Devices
NEC
Express5800
T120g
②
Dust Proof Cover