IMET Spa VELOX 350 AF-E Instruction Manual, Maintenance And Spare Parts page 45

28/11/02-\\SERVER\TECNICO\-SNZ\0Sit\hVelox350afe.doc-Scheda Identificazione Codice Padre
(mac.sott.etc...)-45 di 76 pagine.
ER0001 error in the configuration EEPROM
ER0002 error in the data checksum in EEPROM 1
ER0003 error in the data checksum in EEPROM 2
ER0004 error in the data checksum in EEPROM 3
ER0005 error in the saved data in the permanent memory
ER0020 emergency active (emergency pushed?)
ER0021 motor overload protections (overheated motor?)
ER0022 open carter
ER0023 broken band
ER0024 FREE
ER0025 blocked inverter (motor under stress?)
ER0026 too high motor absorption
ER0027 not correct position of the tool for starting the cutting cycle (blade locked in the workpiece?)
ER0028 vice pressure problem (vice too open/oil pressure?)
ER0029 blade unblocking -for SIRIO models only-
ER0030 bar end - in automatic cycle - (end of the material?)
ER0031 carriage not in correct position - for starting the automatic cycle -
ER0032 feeder vice (vice too open?)
ER0033 piece counter selection on 0 (for automatic cycle)
ER0034 OIL PUMP DEACTIVATED - for hydraulic models - or DISCONNECTED AIR - for hydropneumatic
models
ER9999 overflow in the machine timer (it is necessary to switch the system off and then on).
Remove the causes of the anomaly and push any other key to cancel the display code.
1st. block
2nd. block
3rd. block
Pagina n°- 45