Figure 16 Installing a GPS antenna
Connecting Ethernet interface cables
1.
Connect one end of the cable to an Ethernet port on the router.
2.
Connect the other end of the cable to the Ethernet port on a host.
3.
Examine the port LEDs on the router. For more information about the LEDs, see "LED
description."
Figure 17 Connecting an Ethernet cable
Connecting the console cable and setting terminal
parameters
Connecting the console cable
CAUTION:
The serial ports on PCs do not support hot swapping. To connect a PC to an operating router, first
connect the PC end. To disconnect a PC from an operating router, first disconnect the router end.
18