Table of Contents
Advertisement
Quick Links
1
2
3
4
5
1
Battery Status LED
2
Bluetooth Status LED
3
Device ID Number
4
ON Button
*CAUTION: Do not wash
the sampling bottle in a
dishwasher or autoclave.
It will melt.
Hardware
Included Equipment
Wireless CO
Sensor
2
Micro USB Cable (1 meter)
Gas Sampling Bottle (250 mL)
800-772-8700 (US)
www.pasco.com
Wireless CO
PS-3208
Part Number
PS-3208
Sensor
2
6
5
Micro USB Port
6
Micro USB Cable
Gas Sampling Bottle*, 250 milliliters
(Included. Shown on page 3.)
Introduction
The Wireless CO
2
USB sensor that connects to a computing device
through
with a USB cable (included). The sensor measures car-
bon dioxide concentration in the range between 0 parts
per million (ppm) and 100,000 ppm. The sensor can be
used with or without the included gas sampling bottle.
The PASCO Data Collection Software will display and
analyze the measurements from the sensor. NOTE: The
software also supports "remote data logging" for long
term experiments.
The sensor is designed to optimize the battery usage
time. Since each sensor has a unique Device ID
number, more than one can be connected to a computer
or tablet at the same time.
Re fe rence G u id e
013-15272B
Power: Rechargeable Battery
Connection:
OR
USB Cable
Sensor is a combination wireless
, and can also connect to a computer
+1 916 462 8384
support@pasco.com
and
Advertisement
Table of Contents
Related Manuals for PASCO PS-3208
Summary of Contents for PASCO PS-3208
- Page 1 Hardware per million (ppm) and 100,000 ppm. The sensor can be used with or without the included gas sampling bottle. The PASCO Data Collection Software will display and Included Equipment Part Number analyze the measurements from the sensor. NOTE: The software also supports “remote data logging”...
-
Page 2: Data Collection Software
• Chromebook Initial Step: Charge the Battery See the PASCO Web page at www.pasco.com/software for help in selecting the right PASCO software and to check the latest versions. Software Help See the SPARKvue Help or PASCO Capstone Help for •... -
Page 3: Set Up The Hardware
Charged Yellow blink Logging* *Logging: PASCO wireless sensors can either stream live data to a compatible device for “real-time” viewing or log data (save it to the sensor’s memory). After logging, the data can be uploaded to the computing device for display and analysis at a later time. -
Page 4: Set Up The Software
Battery life is very important to making the sensor simple Connecting the Wireless Sensor to a Computing Device and always ready to use, so all of the PASCO wireless via Bluetooth products are designed for long battery life. For example, the sensor turns itself off after a few minutes of inactivity •... -
Page 5: Suggested Experiments
0.19% of reading per mm of Hg from standard pressure Practically any experiment that uses a carbon dioxide gas measurement can be done with the PS-3208 Max Wireless Range 30 m (unobstructed) Wireless CO Sensor. See the PASCO Web site at... -
Page 6: Replacement Parts
• Gas Sampling Bottle (250 mL) Check the PASCO Web page at Limited Warranty www.pasco.com/compatibility For a description of the product warranty, see the PASCO catalog. For more information visit www.pasco.com/legal for the latest information on Bluetooth SMART Copyright compatibility. - Page 7 Exception: Before you upgrade to El Capitan (Mac OS X 10.11.x), if you have a Macintosh with LMP version “0x4” that requires the PS-3500 USB Bluetooth 4.0 Adapter, please contact PASCO Technical Support for further instructions. ® What is Bluetooth SMART Bluetooth SMART (also known as Bluetooth Low Energy or Version 4.0 of the Bluetooth specification) is the latest...
Need help?
Do you have a question about the PS-3208 and is the answer not in the manual?
Questions and answers