Remote Control Operation Guide - Reverie R600 Owner's Manual And Reference Manual

OPERATING INSTRUCTIONS:
NOTE:
All screens will timeout after 5 seconds,
15 seconds if screen is auto-refreshing
HEAD AND FOOT ADJUSTMENTS (A,B)
• Adjusts the head and foot sections to the de-
sired positions.
• Zero Clearance feature allows for the founda-
tion to be placed on the floor without legs and
able to adjust all sections [head/foot/pillow] in a
complete motion range without any of the me-
chanical parts under the bed touching the floor.
Basically allows you to use your adjustable bed
without legs if desired.
TILT (C)
• Includes a remote-controlled adjustable tilt back-
wards and forwards.
ZERO GRAVITY (D)
• Allows your legs to be lifted to a position slightly
above the chest, which enables blood flow to
easily circulate back to the heart, thus reducing
stress and fatigue.
ANTI SNORE (E)
• Raises the HEAD slightly for easier breathing.
POWER BASE "FLAT" BUTTON (F)
• Levels the power base to the flat position when
the button is pressed and held for at least 3
seconds.
NOTE: Any control button on the remote
will interrupt and stop the FLAT, ZERO-G,
Anti-Snore and Memory presets 1-2.
PROGRAMMABLE MEMORY POSITIONS (G,I)
You can store 2 personalized memory positions.
WAVE MASSAGE PATTERN (L)
•
MASSAGE STOP BUTTON (M)
•
CHARGING PORT (O)
•
•
•
CUSTOMER SERVICE: 800-973-8374
CUSTOMERSERVICE@REVERIE.COM
17

Remote Control Operation Guide

• To Set a Memory Position: When in desired po-
sition, press and hold Memory button for more
than 5 seconds until the LED light flashes 3
times to signal Memory position is stored.
• To recall a Memory Position: Press 1 of the 2
presets.
AMBIENT LIGHTING ON/OFF (H)
• Toggle the lightbulb button for on/off functions.
HEAD AND FOOT MASSAGE CONTROLS (K,N)
• Turns on the corresponding massage unit
(starting at intensity 5 of 10)
• Slowly increases or decreases massage inten-
sity. To increase massage intensity, press (+)
button. To decrease massage intensity, press (-)
button.
NOTE: The lowest setting will turn off the
corresponding massage unit.
Turns on both head and foot massage motors to
the wave 1 preset.
Press to stop all massage features.
NOTE: The massage feature is designed
to automatically shut off after 30 minutes of
continuous use.
To charge remote, plug in the wall charger and
connect to the micro usb port.
Unplug and plug-in the remote again if you do
not see a charging symbol on the screen.
Flashing LED on remote indicates Low Power
status.