Error Code; Display Upon Start-Up; Displays During Operation - Ammann ARX 36 Original Manual

5.2

Error code

The current operating state and the errors recognized by the controller are displayed
above the hour counter.
5.2.1

Display upon start-up

If the machine is not in operation, e.g. the seat contact is not closed, the issue pre-
venting start-up will be displayed:
Tab. 5-1 Error code upon start-up
Display
-11
-12
-13
-14
-15
NOTE The display remains blank when the machine is in operation, in other words,
when it is being driven and/or is vibrating.
If errors are recognized, the error warning lamp lights in addition to the display of the
error code. If more than one error is present, they will be displayed one after the other
at an interval of about 5sec.
5.2.2

Displays during operation

Tab. 5-2 Error code during operation
Display Error
F21 Operating lever
right
F22 Move operating
lever, neutral
switch to right
F23 Operating lever
left
F24 Move operating
lever, neutral
switch to left
F25 Sprinkler potentio-
meter
F26 Oil temperature
sensor
Operating and display elements
Error
Seat contact open
Operating lever is deflected
2 operating levers (optional),
both operating levers deflected
Parking brake is activated
Diesel engine is not running
Effect
Vehicle standstill. Limited driving is possi-
ble with operating lever left, if present.
Vehicle standstill. Limited driving is possi-
ble with operating lever left, if present.
Vehicle standstill. Limited driving is possi-
ble with operating lever right.
Vehicle standstill. Limited driving is possi-
ble with operating lever right.
Sprinkler function switched off.
Temperature control switched off.
Remedy
Sit down
Put the operating lever in the neutral posi-
tion
Put the operating lever in the neutral posi-
tion
Release parking brake
Start the engine
Remedy
Check sensor, wiring harness
and connector of the RC.
Check sensor, wiring harness
and connector of the RC.
Check sensor, wiring harness
and connector of the RC.
Check sensor, wiring harness
and connector of the RC.
Check sensor, wiring harness
and connector of the RC.
Check sensor, wiring harness
and connector of the RC.
47