PEUGEOT Traveller Handbook page 270

In the event of a breakdown
F Lower the vehicle again fully.
F Fold jack 2 and detach it.
F If your vehicle is so equipped, tighten the
security bolt using the wheelbrace 1 fitted
with the security socket 4.
F Tighten the other bolts using wheelbrace 1
only.
F Stow the tools in the tool box.
268
Tyre under-inflation detection
The steel spare wheel does not have a
sensor.
After changing a wheel
Stow the punctured wheel in the carrier.
Go to a PEUGEOT dealer or a qualified
workshop as soon as possible.
Have the punctured wheel checked. After
inspection, the technician will let you know
if the tyre can be repaired or if it must be
replaced.
Some driving aid functions should be
disabled, e.g. the Active Safety Brake.
If your vehicle has tyre under-inflation
detection, check the tyre pressures and
reinitialise the system.
For more information on Under-inflation
detection, refer to the corresponding
section.
Wheel with hub cap
When refitting the wheel, refit the hub
cap starting by placing its notch facing the
valve and press around its edge with the
palm of your hand.
Fastening the steel wheel
If your vehicle is fitted with alloy wheels,
when tightening the bolts on fitting, it is
normal to notice that the washers do not
come into contact with the spare wheel.
The wheel is secured by the conical
contact of each bolt.
The tyre inflation pressures are indicated
on this label.