Unmonday 4.3 VOL II User Manual page 2

FIRST STEPS
I. WITH
SETUP USING iOS (iPHONE, iPAD)
1. Download 2. Switch on Unmonday 4.3
Unapp on the VOL II on and press the power
App Store. button for 10 seconds.
In 30 seconds the power
button starts blinking green.
3. Open wifi menu from your
device settings and choose
Unmonday under "SET UP NEW
AIRPLAY SPEAKER".
SETUP USING ANDROID
1. Download 2. Switch on Unmonday 4.3
Unapp on VOL II on and press the power
Google Play button for 10 seconds.
store. In 30 seconds the power
button starts blinking green.
UNMONDAY
4. The system automatically 5. In 30 Seconds
suggests the network your the power button
device is connected to. If you light turns into solid
wish to connect to another green and the setup
network press "SHOW OTHER is completed and
NETWORK" and choose the you are good to go.
network you wish to connect
the speaker. Press next.
3. Open UNAPP Application, 4. In 30 Seconds
press either the "1 UNCON- the power button
FIGURED AUDIO SYSTEMS light turns into solid
FOUND", or select "SET UP green and the setup
NEW AUDIO SYSTEM" from is completed and
the top menu and follow you are good to go.
the simple setup instructions
to complete the setup.
SETUP BLUETOOTH
II.
Pairing needs to be done only once and note that it takes 30 seconds
for the speaker to accept the connection after turning it on.
1. Turn on the speaker 2. Press power button
and wait for 30 seconds for 3 seconds to activate
until the led light Bluetooth.
turns into (solid green,
blinking green or
blinking red depending
on wether the speaker
is connected to the
home network or not).
SIX SIDES
III. ACTIVE CHANNEL UP
Unmonday 4.3 VOL II has six different positions written
on each side of the speaker: MONO, LEFT, RIGHT,
REAR LEFT, CENTER and REAR RIGHT. These six sides
enable you to create different sound systems and
listening experiences with one or multiple speakers,
expanding from mono to full surround sound.
3. Open Bluetooth 4. Once the pairing
menu from you device is completed your
and choose: device is connected
Unmonday-BT*** to Bluetooth.
Simply select the channel you want to use by
rotating the speaker. The side facing up is the
active channel.