Updating Your Integral 2 Firmware With A Windows Pc - HDFury Integral 2 User Manual

20 4K Integral 2 – User Manual

Updating your Integral 2 Firmware with a Windows PC

The Integral 2 Firmware Updater is compatible with all Windows from Win XP to Win 10.
Make sure you have installed the right Silabs driver based on your Windows version and USB port as
described in previous page.
You can download the latest Firmware version for your Integral 2 device from the Download Tab on the
Integral 2 Product page: here. If you are unsure about your Firmware version currently in use, simply use
the Total Control APP for Android/iOS info page or the USB GUI for Windows PC to retrieve it.
Once downloaded and extracted, you should have a directory on your computer with the following files
You will have to run both Update FPGA and Update MCU to successfully upgrade your Integral 2 unit.
Note: Version number could be different depending on the FW revision you downloaded.
You can start by any of them; there is no particular order to respect.
However, you might prefer to start by MCU update as it does not require mandatory power cycle.
FPGA update will take about 50s while MCU update is taking less than 5s.
After updating the FPGA firmware, you will be prompted to power cycle your Integral 2 unit, you won't
see any light about 15s as the unit is reconfiguring itself. Once ready, light will come back on. This is only
valid for any FPGA update.
If any issue after update, please refer to p.13
rd
Disclaimer: 3 party and/or custom firmware providing extra features are not covered in this manual.