How To Use Magswipe Configuration Utility - Unitech MS242 User Manual

2.3 How to use MagSwipe
Configuration Utility
MagSwipe Configuration Utility is designed to make special configuration
settings as easy as possible. Please follow the step-by-step instructions below.
Step 1. Download MagSwipe Configuration Utility to the Program Files
folder on your local drive.
Step 2. Connect the reader to the host computer and ensure it is getting
power.
Step 3. Open MagSwipe Configuration Utility.
Step 4. Click SELECT READER INTERFACE. This will open a new form.
Step 5. Select the appropriate interface based on the connector used to
connect the reader to the host. (If you skip this step, the utility will
automatically use the previously-selected interface, or find the
appropriate USB interface.)
Step 6. MagSwipe Configuration Utility will automatically determine the
correct port.
Step 7. Select CONTINUE.
MagSwipe Configuration Utility will return to the main screen.
Step 8. You are now ready to configure the reader using MagSwipe
Configuration Utility. To check the reader's current settings, click
CHECK CURRENT READER SETTINGS. The reader's settings will
be displayed, along with the interface type and firmware version.
MS242 User's Manual
10
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co.,Ltd