Installing The Drivers - Omron DeviceNet 3G8F7-DRM21-E Operation Manual

Installing the Drivers

2-3 Installing the Drivers
Windows 98 Installation
1,2,3...
16
After the Board is installed in the computer and the computer is started, the
Board will be detected as new hardware (except for Windows NT computers,
see note). Install the driver to ensure correct operation of the Board.
The installation method and windows displayed when installing the driver will
differ depending on the Windows operating system used.
This section describes driver installation for Windows 98 and XP.
Note The Board will not be automatically detected with Windows NT 4.0.
The driver must be installed with Scanner SDK. Perform the instal-
lation procedure described in 2-4 Installing the Scanner SDK Soft-
ware.
1. After the Board is installed in the computer and the computer is started, the
Board will be detected as new hardware and the Add New Hardware Wiz-
ard will start automatically as shown in the following diagram.
Click the Next Button.
2. A window will be displayed to select the driver search method. Select Dis-
play a list of all ... and click the Next Button.
Section 2-3