CONTENT Safety instructions Intended Use Technical data Items supplied Description of the appliance Before the First Usage Operation Filling with water...4 Attaching/detaching the brush attachment ...5 Steam brush function...5 Clothing care ...5 Curtain and soft furnishing care...6 Fluff brush ...6 Ironing function ...6 After using the steam brush ...7 Cleaning and care...
• You should not open the filler opening of the water reservoir while the iron is in use. First of all, remove the plug from the power socket and allow the device to cool down completely.
5 Heating-up control lamp 6 Suspension eye 7 Power cable with power plug 8 Steam blast button 9 Stand 0 Sole of the iron q Unlocking device for brush attachment w Brush attachment e Fluff brush r Clothes brush t Measuring beaker Before the First Usage •...
• Activate the steam shot button 8 a few times, so that steam exits from the soleplate 0. • Then iron a redundant piece of material, this will remove any impurites that may possibly be on the sole of the iron 0.
(inside seam) that the hot steam will not cause any damage to the garment. Do not touch these ma- terials directly with the hot sole of the iron 0. Use only the steam blast. Clothing care •...
• You can repeatedly press the steam blast button 8 until the heating-up control lamp 5 glows or water drips from the sole of the iron 0. Then, wait until the heating-up control lamp 5 extin- guishes before activating a further blast of steam.
• If you want to put the appliance down during use, fold out the stands 9 to the front and place the appliance on them. When you are ready to reu- se the appliance, simply fold the stands 9 back to the rear.
Disposal Do not dispose of the appliance in your normal domestic waste. This product is subject to the European guideline 2002/96/EC. Dispose of the appliance through an approved dis- posal centre or at your community waste facility. Observe the currently applicable regulations. In case of doubt, please contact your waste disposal centre.
Need help?
Do you have a question about the SDRB 1000 A16 and is the answer not in the manual?
Questions and answers