Assembly
Step 7
Take the base plate
Then place the base plate
the fl oor plate.
Installing the appliance in the fi re surround
To fi nalise, install the appliance in the assembled fi re surround.
Place the appliance carefully on the base plate (from the rear of the fi re surround) and then push it
gently forward as far as it will go into the opening of the fi re surround.
Secure the appliance to the fi re surround at the edges with the fi xing devices
6 x 25 mm
Insert the plug into the mains power socket.
WARNING
Improper laying of the power cable can cause damage to people and property!
Pay heed to the following safety information to avoid these risks:
Do not bend or clamp the power cable and do not lay it tautly.
►
Do not run the power cable over sharp edges.
►
SEKU 2000 A1
6
and insert 4 wood plugs
6
on the fl oor plate
Rear view
6
B
B
7
.
A
into the holes of the plate underside.
B
7
so that the four wood plugs fi t into the four holes in
Front View
F
A
and the screws
F
13
GB
IE