A Reference to a figure, e.g. Fig. A. → Reference to another section. packaging or in this manual. • Disconnect the power plug be- fore carrying out any work on the unit. FiltoSmart 100/200/300, FiltoSmart Thermo 100/200/300...
Locking clip Connection unit with hose con- Retrofitting nector, outlet (OUT) and inlet FiltoSmart 100/200/300 can be retrofitted with OASE (IN) HeatUp (following table). Connection set • The retrofit set ThermoFit (following order num- Filter bag with activated car- —...
• The unit head is removed. (→ Dismantling the unit connected. head) How to proceed: How to proceed: • Steps 1 and 2 do not apply to FiltoSmart 100. F K 1. Turn the bayonet closure in the direction "UN- 1. Take out a separating plate.
6. Fit the holder and fasten it onto the separating plate Assembling the flow-out unit (FiltoSmart 200/300) or to the wall of the container How to proceed: (FiltoSmart 100). M 7. Push the heater into the holding ring as far as it • Assemble the flow-out unit.
Water temperature incorrectly set on the heater Correct the water temperature set- ting on the heater. Increased noise Air in the filter, vent hose on the pump not correctly Correct the position of the vent positioned. hose. FiltoSmart 100/200/300, FiltoSmart Thermo 100/200/300...
• Rinse the ceramic substrate in warm water or re- • Suction cups place. • Impeller unit – FiltoSmart 300 requires three, FiltoSmart 200 • Foam filters two and FiltoSmart 100 one bag (420 g) of ce- • Activated carbon ramic substrate. • Ceramic substrate...
Downloaded from www.watergardeningdirect.com - EN - SPARE PARTS The use of original parts from OASE ensures continued safe and reliable operation of the unit. Please visit our website for spare parts drawings and spare parts. www.oase-livingwater.com/spareparts DISPOSAL N O T E Do not dispose of this unit with domestic waste.
Page 18
Downloaded from www.watergardeningdirect.com...
Need help?
Do you have a question about the FiltoSmart 100 and is the answer not in the manual?
Questions and answers