Knoll Pixel KCXE6030G Installation Instructions Manual

C-leg electric height adjustable tables

Hide thumbs

page of 6

/ 6
Bookmarks

Quick Links

Download this manual

PIXEL™ Installation Instructions

C-Leg Electric Height Adjustable Tables

Glides only

Related tables:

KCXE6030G

KCXE7230G

Unboxing

You should have received your top plus two boxes per table.

Box 1 includes:

C-Leg assemblies, feet castings, electrical controller box and

screws, control switch with cable and screws, leg extension

cables, main power cable, hardware in a red plastic bag, and

installation instructions.

Box 2 includes:

C-Leg rail kit

Please pay close attention to torque requirements.

Step 1.

Lay the inverted table top on the floor.

Step 2.

Align the two "C" section rail (A) holes with the top

pilot holes. Attach the rails to the top using pan

head sheet metal #10 x 1.00 screws, 6 per rail,

torque: 20 in/lb.

4AU6004 - Oct 2015

Page 1 of 6

Parts list

1 Table top

2 C-Leg assemblies

2 Feet castings

1 C-Leg rail kit

1 Electrical controller box

and screws

1 Control switch with cable

and screws

2 Leg extension cables

1 Main power cable

Hardware

24 Pan head sheet metal #10 x 1.00 screws

12 Socket button head M6 x 12mm screws

2 Pan head sheet metal #10 x 2.00 screws

8 Socket head cap M6 x 55mm screws

2 Vertical wire management clips

(clear plastic)

4 Horizontal wire management clips

with wood screws

Tools needed

Allen wrenches

Torque wrench

Phillips screwdriver

Fig. 1

Need help?

Do you have a question about the Pixel KCXE6030G and is the answer not in the manual?

Questions and answers

Summary of Contents for Knoll Pixel KCXE6030G

Page 1 PIXEL™ Installation Instructions C-Leg Electric Height Adjustable Tables Glides only Related tables: KCXE6030G KCXE7230G Unboxing Parts list Hardware You should have received your top plus two boxes per table. 1 Table top 24 Pan head sheet metal #10 x 1.00 screws 2 C-Leg assemblies 12 Socket button head M6 x 12mm screws 2 Feet castings...
Page 2 PIXEL™ Installation Instructions C-Leg Electric Height Adjustable Tables Step 3. Align the two end bracket (B) holes with the top pilot holes. Attach the brackets to the top using pan head sheet metal #10 x 1.00 screws, 5 per rail, torque: 20 in/lb. Fig.
Page 3 PIXEL™ Installation Instructions C-Leg Electric Height Adjustable Tables Step 5. Attach feet castings (D) to C-Leg 3 stage assemblies (E) using socket head cap M6 x 55mm screws (F), 4 per leg, torque: 20 in/lb. Fig. 4 Step 6. Insert the 3 staged motorized leg assemblies (G) into the rail frame.
Page 4 PIXEL™ Installation Instructions C-Leg Electric Height Adjustable Tables Step 7. Attach the controller box (I) in the desired position between the rails and legs motors using two pan head sheet metal #10 x 2.00 screws (J). Step 8. Attach the control switch (K) on the desired side of the table top using two pan head sheet metal #10 x 1.00 screws (H).
Page 5 PIXEL™ Installation Instructions C-Leg Electric Height Adjustable Tables - Operating Instructions Parallel drive The arrow buttons (A). Hold down the button to activate the parallel drive. Memory drive Small buttons with dots (B). Press one of the memory buttons and the system will start driving to the pre-programmed memory position.
Page 6 Now the desk can drive up. Check: Are there any visible damages on cables, controls, the control box or legs? Try/Solution: Contact Knoll Customer Service. Check: Is something blocking the movement: cables, furniture or other objects? Try/Solution: Remove items that are blocking the table.

This manual is also suitable for:

Pixel kcxe7230g