Dtc: P0097 And P0098; P0097: Intake Air Temperature Sensor (Intake Manifold) - Out Of Range - Hino Motors HINO 155 series Workshop Manual

DTC: P0097 and P0098

P0097: Intake air temperature sensor (intake manifold) - out of range (Out of range low)
INFORMATION
Common rail
pressure sensor
Intake manifold
temperature sensor
1. Technical description
• The intake air temperature sensor installed to the intake manifold consistently measures intake manifold tempera-
ture.
<Description of malfunction>
• The intake manifold temperature cannot be correctly recognized.
2. DTC set condition
(1) DTC detection condition
• Starter key "ON".
• Battery voltage is in the range of 10 V to 16 V.
• The engine is stopped, or the engine speed remains at 500 r/min or more for 5 seconds or more.
(2) Judgement criteria
• Intake manifold temperature sensor output ≤ 0.06 V (200 C {392 F}) for at least 3 seconds.
3. Reset condition
• After restoration to normal condition
4. Indication, warning or system control regulation when the DTC is set.
• MIL: ON
• SVS light: OFF
5. Symptoms on the vehicle when the DTC is set
<Symptoms on the vehicle due to backup control (fail safe function)>
• –
<Symptoms on the vehicle due to malfunction>
• –
6. Pre-inspection work
• Check that the battery voltage is in the normal range.
ENGINE (J05E)/TROUBLESHOOTING
15mA
EBK
E1
2mA
EBJ
PCR1
15mA
EBH
VC1
15mA
EBN
E2
2mA
EBM
PCR2
15mA
EBL
VC2
10mA
Z7G
(E2)
10mA
X0Q
(THA)
2–187
EN01H02127030602016037
Engine ECU
$XV
(PC1S)
Z70
(E1)
XZG
(PCR1)
X85
(VC)
Z72
(E2)
XZH
(PCR2)
XG2
(VC2)
$XW
(PC2S)
XZJ (THIA)
SHTS021270300173