Advertisement
Advertisement
Table of Contents
Related Manuals for Pulsar Quantum LiteX Q23V
Summary of Contents for Pulsar Quantum LiteX Q23V
- Page 2 Attention! Export of models 77337/77338 with a refresh rate of 50 Hz may have export limitations depending on the laws in your region. Attention! L'exportation des modèles 77337/77338 avec une fréquence de renouvellement d'images de 50 Hz peut avoir des restrictions à...
-
Page 3: Specifications
Microbolometer: The design and software of this product are subject to change for development purposes. uncooled uncooled Type The latest edition of this user manual is available at www.pulsar-nv.com Resolution, pixels 384x288 384x288 Frame rate, Hz Pixel size, µm Optical characteristics:... -
Page 4: Components And Control Elements
Functions of the controls Controls Operating mode 1st short press Subsequent short Long press Rotation COMPONENTS AND CONTROL ELEMENTS name press(es) Button Scope is off Turn the scope on Display off Turn the — Controller scope off Button “RF” Display on Scope is on Turn the display off Button “MODE”... -
Page 5: Installation Of Batteries
Status bar The power supply may have marking The status bar in the lower part of the display shows information as follows: Connection of an external power supply (icon on the status bar) automatically cuts off power supply from batteries. Operating mode: City, Forest, Identification. - Page 6 Automatic calibration mode Locate the lower fixed cursor under the observed object and, while rotating the controller (1), move the upper With the automatic calibration mode the thermal imager calibrates by horizontal cursor relative to the lower fixed cursor until the itself according to the software algorythm.
- Page 7 After exiting the menu, the color mode selected by user becomes a default Defective pixel repair mode and it is saved upon turning the unit off. When pressing the “MODE” When operating a thermal imager, defective (dead) pixels (bright or (3) button for two seconds, color mode will switch to standard mode dark dots with constant brightness) may appear on the detector, which “White Hot”.
-
Page 8: Video Output
To exit the submenu, keep the controller pressed for two seconds or attached. wait 10 seconds to exit automatically. Using the DNV Pulsar Battery Double Pack (#79176) you can significantly extend the self-contained operating time of your monocular. Digital zoom To activate digital zoom, press briefly button “Mode”... - Page 9 At low operating temperatures objects under observation (background) normally cool down to roughly equal temperatures which leads to lower temperature contrast, and to image quality (precision) degradation. This is normal for thermal imaging devices. Click on the link to read frequently questions on thermal vision http://www.pulsar-nv.com/support/faq/...
Need help?
Do you have a question about the Quantum LiteX Q23V and is the answer not in the manual?
Questions and answers