GENERAL SAFETY TECHNICAL NOTES BEFORE USE ELECTRICAL CONNECTIONS, STANDARD MODELS connectors fridge side cords irect connection to a battery (100-240V 50/60 h ptional se of the oldtainer connected to mains ELECTRICAL CONNECTIONS, “AUTONOMOUS OPERATION” MODELS (100-240V 50/60 h onnection to mains OPERATION ontrol panel...
GENERAL The c s has been designed for the professional temperature controlled oldtainer transport of limited volumes of perishable items, like food, pharmaceuticals, biologicals. The units are designed, if properly operated and connected to a suitable power source, to maintain perishable items at a stable temperature during transport, as a link of a “cold chain”...
TECHNICAL NOTES Specific versions with different internal temperature setting are available for each container size, (ask for data sheet of single models for specific values): • NDN: cooling function, internal temperature down to 0°C (with +32°C ambient) NDH: automatic cooling / heating function, internal temperature from 0°C to +30°C (with ambient temperature from -20°C to +32°C) •...
IMPORTANT: The DC cord 540010/01 with cigarette plug cannot be used with other models, wires (included ones of onboard 12V outlets) are not of right size and Ah capacity. ireCt ConneCtion to a battery Connect the DC cord to the Coldtainer (red AP connectors) from one side and...
directly to the + and – terminals of the battery from the other side (or to the 12V outlet of the car, on applicable models). The DC cords are fuse protected. Make sure that the fuse is in place. Also the DC input connectors on the fridges are fuse protected.
charging time) OPERATION ontrol panel The control panel of all fridges is made of 3 elements: • the main switch • the electronic thermostat (touchscreen type) • the red led light of self-diagnostic or the jack for the connection to SECOP communication gateway and Tool4Cool diagnostic software (only units with BD220CL compressor).
To operate the thermostat the touchscreen keys are The display can show following alarm labels: “Pr1” cabinet probe alarm “AL” low temperature alarm “AH” high temperature alarm witCh on the Ensure at all times that there is sufficient ventilation so that the heath generated during operation can dissipate.
4. Touch the SET key (or do not operate for 15 seconds), the display will show the label “SP” 5. Touch the UP or DOWN key to select a parameter to modify 6. Touch the SET key, the display will show the actual value 7.
• reach parameter “A6”, high temperature alarm delay after power on - Min…Max values are 0…99 minutes (default is 0) - touch UP or DOWN to select a value and touch SET key to set it • reach parameter “A7”, high/low temperature alarms delay - Min…Max values are 0…240 minutes (default is 0) - touch UP or DOWN to select a value and touch SET key to set it •...
OPTIONAL – USE OF HACCP / BLUETOOTH MODULE EVconnect is an easy solution that helps to easily get HACCP temperature and to manage the temperature alarms. EVconnect is made of the EVLINK, a memory an transmission module (provided with 16Mb memory, real time clock and Bluetooth 4.0 transmission module) and of the EVconnect App for Android 4.4 devices.
• modification, misuse, improper installation, abnormal service, storage hazardous chemicals, use of corrosive substances, transit damage, recharging of cooling system, accident, fire, improper repair, tampering or abuse • incorrect voltages or faults with regards to power supply which falls outside of the appliance operating parameters.
Page 15
Italy by Euroengel srl Via Ferrini 14 (25128), Brescia info@euroengel.it info@coldtainer.com Coldtainer™ is a trademark by Euroengel srl Euroengel is a ISO 9001:2008 certified company Approved by the Italian Ministry of Transport as manufacturer of ATP isothermal containers...
Page 16
Euroengel srl via Ferrini 14, (25128), Brescia, Italy...
Need help?
Do you have a question about the T0022/FDN and is the answer not in the manual?
Questions and answers