REFRIGERATOR INSTALLATION 3. Install the refrigerator in an area between 55 °F “This appliance is intended to be used in household and (13 °C) and 110 °F (43 °C). If the surrounding temperature similar applications such as: is lower or higher than previously mentioned, it can -Staff kitchen areas in shops, offices and other working adversely affect the unit.
REFRIGERATOR INSTALLATION HOW TO REMOVE AND INSTALL THE REFRIGERATOR DOORS For moving the refrigerator through a house door, it might be necessary to remove refrigerator and freezer door handles. NOTE: Removing the doors is always recommended when it is necessary to move the refrigerator through a narrow opening.
Page 4
REFRIGERATOR INSTALLATION NOTE: Removing the doors is always recommended when it is necessary to move the refrigerator through a narrow opening. If it is necessary to remove the handles, follow the directions below. HOW TO REMOVE FREEZER DOOR HANDLE NOTE: Handle appearance may vary from illustrations on this page.
REFRIGERATOR INSTALLATION REFRIGERATOR INSTALLATION REMOVING AND REPLACING CAUTION: Before you begin, remove food and bins REFRIGERATOR DOORS from the doors. WARNING Excessive Weight Hazard: Use two or more people to remove and install the refrigerator doors. Failure to do so can result in back or other injury.
Page 6
REFRIGERATOR INSTALLATION REFRIGERATOR INSTALLATION Reinstalling the Refrigerator Door Right Door Left Door 1. Lower the door onto middle hinge pin (9). 2. Line up the holes in the top hinge with the holes in 1. Lower the door onto middle hinge pin (10). the top of the refrigerator.
Page 7
REFRIGERATOR INSTALLATION REFRIGERATOR INSTALLATION HOW TO REMOVE THE FREEZER DRAWER WARNING: Use two or more people to remove and Remove the screws (2) of the rail on both sides. install the freezer drawer. Failure to do so can result in back or other injury.
Page 8
REFRIGERATOR INSTALLATION REFRIGERATOR INSTALLATION HOW TO REPLACE THE FREEZER DRAWER With the drawer pulled out to full extension, insert the Pull out each rail to full extension. lower basket 4 in the rail assembly. • Hook the door support (1) into the rail tabs (2) on both Grasp the drawer on each side and hook door supports 1 into the rail tabs 2 located on both To replace, with the drawer pulled out to full extension,...
REFRIGERATOR INSTALLATION LEVELING AND DOOR ALIGNMENT Door Alignment Leveling If the space between your doors is uneven, follow the instructions below to align the doors: After installing, plug the refrigerator’s power cord into a 3-prong grounded outlet and push the refrigerator 1.
Need help?
Do you have a question about the LFD2278 Series and is the answer not in the manual?
Questions and answers