Corepoint Service - Welch Allyn Connex CS Install Manual

36 HL7 Interface Configuration

Corepoint service

In some cases the entire Corepoint service may need to be restarted also. Open the Corepoint
Administration tool, which opens in an Internet Explorer browser session.
To Corepoint service:
1. Click the Stop button
2. Click Yes to confirm stopping the service when prompted.
Figure 5-23: Confirm stopping the Corepoint service
3. Click the Start button in the center of the window to the Corepoint Integration Engine Service.
See Figure 5-24 for an example.
Figure 5-24: Start button to Corepoint
in the bottom section of the screen.