Table of Contents
Advertisement
Basic uses of NEXiO
Turning on/off NEXiO
When you are first using NEXiO, you have to charge
Note
internal battery sufficiently with AC Adapter before using. (Refer to
"Charging battery")
Press power button on the left side of NEXiO, then NEXiO will be
turned on.
When you turn on NEXiO for the first time, Stylus calibration
setting screen will appear.
Stylus calibration setting
When you turn on NEXiO for the first time, + mark will be shown
on Stylus calibration setting screen. Tap on + mark to correspond
stylus and the location on screen.
1. Follow instructions on screen and tap on the + marks with
stylus. + marks disappears after tapping 5 times.
- 18 -
Advertisement
Table of Contents
