SYSTEM FEEDBACK ......................................................................................................................................... 6
Do you have a question about the Product Preservers Powered Anode System and is the answer not in the manual?
Questions and answers
Bec
March 23, 2025
Bonjour, je recherche l anode de magnésium ou je peux le trouver?
Aw300
1 comments:
Mr. Anderson
March 23, 2025
The A.O. Smith Product Preservers Powered Anode System replaces the traditional magnesium anode with an electrode (powered anode). The anode (electrode) is installed at the top of the water heater and can be accessed by loosening the hex head with a 1-1/16” socket and removing the old anode.
This answer is automatically generated
Summary of Contents for A.O. Smith Product Preservers Powered Anode System
POWERED ANODE SYSTEM USER’S GUIDE MODULE ANODE ELECTRODE Table of Contents Page SAFETY ................................2 WIRING DIAGRAM ............................2 INTRODUCTION .............................. 3 INSTALLATION..............................4 SYSTEM FEEDBACK ............................6 REGULATORY NOTICES ............................ 6 SPECIFICATIONS .............................. 6 ASSISTANCE ..............................6 LIMITED WARRANTY ........................BACK COVER PLEASE KEEP THIS GUIDE WITH THE MANUAL AND WARRANTY THAT CAME WITH YOUR WATER HEATER.
IMPORTANT SAFETY INFORMATION Read and follow all safety messages and instruc ons in this guide as well as in your water heater’s use and care guide. This is the safety alert symbol. It is used to alert you to poten al physical injury hazards. Obey all safety mes- sages that follow this symbol to avoid possible property damage, serious injury or death.
INTRODUCTION How Does the Powered On Which Models Can I Anode System Work? Use the Powered Anode WARNING System? The Powered Anode System replaces Electric Shock Risk sacrifi cial anodes which are normally The Powered Anode System can be Contact with electrical shipped with water heaters.
INSTALLATION Shut off the electric D. Remove the old anode rod. If you are in an area with a low ceiling, you can power and/or gas bend the anode rod, if needed. FOLLOW ALL SAFETY NOTICES IN YOUR supply to your water heater. WATER HEATER’S MANUAL.
Page 5
Attach the new Figure 7: Harness Installation control module: Module (installed) A. Set the control module on top of the Red Wire: water heater. See Figure 5 or Figure 6. Plug into module’s “Anode” receptacle. WARNING! If you have a gas water heater, place the module as far away Green Wire: from the draft hood as possible.
Disconnect power to the water heater if it is an by the party responsible for compliance electric model. Remove the (A.O. Smith) could void the user’s anode and clean it with a authority to operate the equipment. cloth. ICES-003 (Canada) Module failure.
LIMITED WARRANTY EFFECTIVE A.O. Smith warrants this Powered Anode System product (“part”) against defects in materials or workmanship for one year from date of purchase, as provided in this warranty when installed in a single- family residence in the United States or Canada. If this part is installed in any location other than a single- family residence, the warranty period is reduced to 90 days.
Need help?
Do you have a question about the Product Preservers Powered Anode System and is the answer not in the manual?
Questions and answers
Bonjour, je recherche l anode de magnésium ou je peux le trouver? Aw300
The A.O. Smith Product Preservers Powered Anode System replaces the traditional magnesium anode with an electrode (powered anode). The anode (electrode) is installed at the top of the water heater and can be accessed by loosening the hex head with a 1-1/16” socket and removing the old anode.
This answer is automatically generated