Information in this document is subject to change without notice. Zone Defense, LLC, Zone Defense, Incorporated, and Zone Defense HK LTD. (collectively known as “Zone Defense”) assume no responsibility for any errors that may appear in this manual. Companies, names and data used in examples herein are fictitious unless otherwise noted.
RideCam™ User’s Manual Introduction Congratulations on the purchase of your Zone Defense system. Zone Defense is a leader in vehicle observation systems. When properly installed and used, your system is designed to provide you with years of trouble-free operation. This manual contains important information required to properly install the unit. Please read this manual thoroughly before beginning.
RideCam™ User’s Manual Interfaces Figure 1 • Mounting Bracket: Mounting bracket will hold the camera to the windshield • Micro USB Port (not shown): The Micro USB port is used for power input • Reset button: Used to manually reset the camera during the troubleshooting process •...
Power cable NOTE:Zone Defense part number R.AVS.RC.V1 uses a USB power cable and contains a dual USB car charger. NOTE: Zone Defense part number R.AVS.RC.V2 uses an in-line power cable and does not contain a dual USB car charger. Installation Instructions 1.
3. If a password is required, the default is 78932100 but a soft reset of the device may be required prior to password entry. 4. Launch a web browser and input the local IP address of the RideCam. This is typicallyhttp://192.168.1.202 but a soft reset of the device may be required to access.
Page 8
FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the RideCam and is the answer not in the manual?
Questions and answers