Log Files - Siemens Server Installation, Operation And Maintenance Manual

Siemens server user manual
Table of Contents

Advertisement

Trend
The submenus of "Trend" show all measured values of the respective device as daily chart. One
group always contains three measured values of the device. These measured values are stored
every 5 minutes in a log file on the CompactFlash board.
In these submenus, it is also possible to display log files from the past by selecting the respective
day, month and year. The selected day will be shown on the chart.

Log files

The log files are text files in ASCII format which can be processed by the other standard programs
(e.g. MS Excel). The log files are located in the directory "ARCH". The log file names are
compounded as follows:
Year (2-digit)
Month (2-digit)
RS 485 bus address
For each bus user, a log file is created per month. The size of the log file depends on the individual
bus user. A maximum capacity of 500 KB is required per bus user and month, i.e.: a data volume of
6MB is expected per year for each bus user. There are different sizes of CF cards available (see
chapter 6.1).
The log files must be backed up regularly (on another drive in a PC), and the older files must be
deleted. If the memory capacity of the CF card is exhausted, the ChemWeb Server cannot be operated
anymore!
03 04 A 00.TXT
The CF card must also include the firmware of the ChemWeb
Server. Therefore it is not allowed to modify or delete any other
files from the CF card than the log files described above! This
would cause data loss and failure of the ChemWeb Server!
The CompactFlash card may only be removed and reinserted if the
ChemWeb Server is switched off! The ChemWeb Server will not
work without the CompactFlash card!
33
Operation and Data Access

Advertisement

Table of Contents
loading

Table of Contents