Handling And Use; Inserting Negatives - Silvercrest SND 3600 D3 Operating Instructions Manual

Handling and use

Inserting negatives

♦ Unlock the catch on the front of the negative holder
open the holder.
♦ Lay the negative in the holder the right way up. Ensure that holes
of the negative strip are placed on the corresponding retaining
tabs on the holder, so that the negative strip can not move.
♦ Close the holder until the lid clicks into place.
♦ Now insert the negative holder
the front and visible into the slot
♦ Push the negative holder
into the first position. For additional negatives, push the negative
holder
5
Figure 1
■ 88 │ GB │ MT
5
further in until it audibly clicks into the next position.
with the triangle marking at
5
on the right (see figure 1).
4
into the slot
4
Figure 2
and
5
until it audibly clicks
SND 3600 D3