Siemens ISI EN 50295 Brochure page 47

■
Technical specifications (continued)
Ambient temperature in °C
Protection
Connection technique
Mounting
Note
K60 mounting plate
For wall mounting
3RK1 901-0CA00
-40 to +85
IP67 with K60 compact module
screwed on
For shaped AS-Interface cable,
contacted through the insulation-
piercing terminals integral to the
compact module
• Wall mounting
• On shaped bracket (the corre-
sponding slide rings are re-
quired)
• Hole spacing is compatible to
K45 mounting plate for wall
mounting
Additional seals are only
necessary when the flat cables
terminate inside the module
(3RK1 902-0AR00)
AS-Interface Slaves
I/O modules for operation in the field
Digital I/O modules IP67 - K60
For rail mounting
3RK1 901-0CB00
-40 to +85
IP67 with K60 compact module
screwed on
For shaped AS-Interface cable,
contacted through the insulation-
piercing terminals integral to the
compact module
• Standard rail mounting
Additional seals are only
necessary when the flat cables
terminate inside the module
(3RK1 902-0AR00)
Standard rail adapter can be
ordered separately as spare parts:
3RX1 660-0B
Hub
--
3RK1 901-1NN00
-40 to +85
IP65 with upper part screwed on
For yellow or black, shaped
AS-Interface cable
contacted through the insulation-
piercing terminals integral to the
upper part
• Standard mounting rail/wall
mounting
• On shaped bracket (the corre-
sponding slide rings are re-
quired)
• Hole spacing also compatible to
coupling module FK/FK-E
(application module)
Distributors can be used for the
following purposes:
• Configuration of network struc-
tures (branch function)
• Isolation of cable segments
(isolating function)
• Sealing cable ends inside the
module (sealing function)
If one or both cables terminate in
the module, seals are required
(straight and shaped) that can
be inserted in the lower part of the
distributor. These seals are not
included in the scope of supply
and must be ordered separately
(3RK1 902-0AR00).
If both cables are routed into and
out of the module, additional seals
are not required.
Siemens IK PI · 2004 6/47
6