Driver Installation - StarTech.com ST1000SPEX2 User Manual

Note: Replacing the pre-installed installation bracket may
be necessary at this point depending on the card purchased
(ST1000SPEX2 / ST1000SPEX2L), and the profile of the system
it is being installed in.
Place the cover back onto the computer case. Insert the
5.
power cable into the socket on the power supply and
reconnect all other connectors removed in Step 1.

Driver Installation

Windows
Upon starting Windows, if the "Found New Hardware" wizard
1.
appears on the screen, cancel/close the window and insert
the included Driver CD into the computer's CD/DVD drive.
AutoPlay should give you the option to browse the files on
2.
the CD or automatically open the CD. If AutoPlay does not
start, Go into "My Computer" and access the CD/DVD drive
that the CD is in (e.g. D:).
Navigate to the location "Realtek/RTL8111" and then access
3.
the folder for the appropriate operating system version.
Double-click the file "Setup.exe" to start the driver
4.
installation program.
Complete the wizard and this will automatically install all of
5.
the drivers/software. Restart the computer if prompted.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
8