Route The Cables Through The Wall Mount Arm - Epson BrightLink 710Ui Installation Manual

D

Route the cables through the wall mount arm

BrightLink 710Ui and BrightLink Pro 1470Ui: Make sure to route the Touch Unit
connection cable through the wall mount arm. Route the Touch Unit connection cable
so that the end that connects to the Touch Unit appears from the lower part of the wall
mount as shown above.
E
Attach the mount arm to the wall plate
1. Insert the hexagonal shaft into the wall mount (
2. Insert and turn the hexagonal shaft at the top of the mount arm into the slot on the wall plate (
).
28
Touch Unit
connection cable
).