Brinsea TLC-30 Advance Operating Manual page 10

TLC-30 Advance
5 DIGITAL CONTROL SYSTEM
(FIG 4)
T*30.0C
T*37.5
-RM
C
H 35%
(FIG 5)
P/
T 30.0C
T*37.5
+RM
C
H 35%
Setting the Temperature:
P/
1. Press the -
simultaneously to unlock the Main
Menu.
2. Press OK to select the temperature
screen and adjust as necessary
using the + and – buttons.
3. Press OK to return to the Main
Menu and then scroll down to
SAVE. Press OK to save the changes.
When reducing temperature the asterisk may go out while
the incubator cools – this is normal
Low Room Temperature Alarm (FIG 4)
for more than 1 hour a warning is displayed "-RM" and an alarm will sound. Press OK to silence the alarm for 30 minutes.


High Room Temperature Alarm (FIG 5)
for more than 1 hour a warning is displayed "+RM" and an alarm will sound. Press OK to silence the alarm for 30 minutes.


Changing the Display to Fahrenheit:
and + buttons
If the low temperature problem rectifies itself the "-RM" remains on the display to show this has happened. Press OK to
clear the indicator.
Check the TLC-30 is not (and has not been) in a cold draught and that the room temperature has not dropped significantly.
If the high temperature problem rectifies itself the "+RM" remains on the display to show this has happened. Press OK to
clear the indicator.
Check the TLC-30 is not (and has not been) in direct sunlight or too near a heat source such as a room heater. Animals
create significant metabolic heat and may contribute to this if room temperature is high.
1. Press the - and + buttons simultaneously to unlock the Main Menu.
2. Scroll to the C/F option and press OK to select the C/F display screen.
3. Press the + button to select °F or the – button to select °C.
4. Press OK to return to the Main Menu. Press OK again to save the changes.
10
– If the calculated room temperature remains too low for optimum results
– If the calculated room temperature remains too high for optimum results