Philips PH11107-B Quick Installer's Manual page 15

Quick Installer Guide for Philips miniPCI 802.11a/b/g card
Field
Profile Name
New/Rename/Delete Buttons
Network Type
Network Name1
Network Name2
Network Name3
Wireless Mode
Peer-to-Peer Net Start
Transmit Rate
OK Button
Cancel Button
Apply Button
3. Interaction of Configuration Screen Controls
(1) Selecting a different profile in the "Profile Name" list causes different settings values
to be displayed in the controls on the Configuration screen, as well as the Security and
Power screens.
(2) When the control panel application is launched, the active profile (whose settings are
currently in use by the device driver) will be shown as the selected profile in the
"Profile Name" list.
(3) Clicking the "Rename" or "Delete" button while the selected profile is "Default" will
result in an error message indicating that the default profile cannot be renamed or
deleted.
(4) Clicking the "Rename" or "New" button will display a dialog (titled "New Profile" or
"Rename Profile", respectively) that prompts the user to enter a profile name.
- 15 -
Description
List of available profiles. User may select from list
to activate or modify a profile.
For creating, renaming and deleting profiles from
the list above.
Allows selection of either "Peer-to-Peer" (Ad-Hoc)
or "Access Point "(Infrastructure).
Lets the user specify an SSID1 for the sele cted
profile.
Lets the user to specify SSID2, in case SSID1 is an
invalid one.
Lets the user to specify SSID3
Shows a list of Wireless Modes such as "Auto"
(Meaning auto detection of Network Type),
"802.11a" and "802.11b". If the 80211abg card is
plugged in "802.11g" will be shown on the list.
User can select from one of these four modes.
The configurable peer-to-peer channel for the
selected profile. The default value is "802.11a".
Displays the Transmit Rate. The default value is
"Auto".
From any screen in control panel app, submits
changes made during session and exits the
Application.
From any screen in control panel app, cancels all
changes made during session.
From any screen in control panel app, submits
changes made during session.