Network feature setting
To save a network feature activation code for activation, press Menu,
select Settings,
Network Services
Type in the feature code provided by your network service and press OK.
Own number selection
The number assigned to your phone provides service for only one service
area. Your phone can be activated in up to three different service areas,
however. Each service area would assign a different phone number or
account to your phone. You must select a phone number for your home
system, and if you travel outside your home system, you can choose
another number. Only one phone number can be active at a time.
Note: It might not be necessary to have up to three numbers for your
phone if your service provider has service or roaming agreements for
each area in which you wish to use your phone. Contact your service
provider for details.
To set your own number according to the service area, press Menu,
select Settings,
Network Services
Restore factory settings
To reset some of the menu settings to their original values, press Menu,
and select
Settings
code. The names and phone numbers saved in the contacts list are not
deleted.
■ Gallery (Menu 6)
You can save images and ringing tones, for example, if
received in a multimedia message, in the folders of the
gallery, see Reading and replying to a multimedia message on page 28.
The gallery uses shared memory.
Note: Your phone must be switched on to use this function. Do not
switch the phone on when wireless phone use is prohibited or when it
may cause interference or danger.
To view the folders, press Menu, and select
list of options is shown. Open the desired folder and the list of files in
the folder is shown. Scroll to the desired file. Press
and then
and then
and
Restore factory
U s i n g t h e m e n u
Network feature
My number selection
settings. Key in the security
Gallery
and
View
Options
setting.
folders. The
and some of
45