Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Nanoxia PROJECT S MINI
Summary of Contents for Nanoxia PROJECT S MINI
-
Page 2: Table Of Contents
4.1 Fans in the right side ___________________________________________________05 5. Installation of a VGA card ____________________________________________________06 6. The I/O-Panel _____________________________________________________________06 7. The Nanoxia RGB Rigid LED Bar _____________________________________________07 7.1 Connecting the Rigid LED Bar to the power supply _________________________07 7.2 Operation of the Rigid LED Bar ________________________________________07 III. -
Page 3: Introduction
Fully modular SSD holders allow the user to reconfigure the case to his own personal needs. The Project S Mini offers ample space for a compact, air cooled system. Another feature is the possibility to use the Project S Mini as a Mini Tower by using it standing upright. -
Page 4: Features
2. Installation options for hard drives You can install up to three drives in the Project S Mini. One 3.5 inch drive can be mounted at the bottom in the front right corner; two additional 2.5 inch holders are available for the instal-... -
Page 5: Mounting Of The 3.5 Inch Hard Drive
2.2 Mounting of 2.5 inch SSDs The Project S Mini offers two dedicated 2.5 inch holders. These are fixed with screws to the bottom of the case and can be removed, if not needed. The drives are secured with screws. -
Page 6: Removing The Front Panel And Top Cover
Up to three 60 mm case fans can be mounted inside the Project S Mini. All air intake openings of the Project S Mini are equipped with easy to clean dust filters. We recommend that you clean them on a regular basis. This includes the air intakes for the SFX PSU and the VGA card. -
Page 7: Installation Of A Vga Card
5. Installation of the VGA card The graphics card is installed horizontally in the Project S Mini. For the installation, first remove the PCI slots by loosening the screws. Then insert the graphics card and screw it into the PCI bracket. -
Page 8: The Nanoxia Rgb Rigid Led Bar
7. The Nanoxia RGB Rigid LED Bar Behind the front of your Project S Mini, a Nanoxia RGB Rigid LED Bar is pre-installed. To choose between the different colors, please use the color selector button in the I/O panel. 7.1 Connecting the Rigid LED Bar to the power supply The Rigid LED Bar is powered by a SATA connector that can be connected directly to the power supply. -
Page 9: Legal Disclaimer
This is part of the continuing policy of product improve- ment at NANOXIA. National product specifications may vary. All rights reserved especially (also in extracts) for translation, reprinting, reproduction by copying or other technical means. -
Page 10: Support
For general inquiries, comments, suggestions and the like please refer to: info@nanoxia-world.com We are sure that you will be satisfied with your Nanoxia Project S Mini for many years to come, so please enjoy your new PC case. Your Nanoxia Support-Team... - Page 11 © Nanoxia...
Need help?
Do you have a question about the PROJECT S MINI and is the answer not in the manual?
Questions and answers