Laser Tools 5846 Instructions

Belt tension gauge

Download this manual

Specifications subject to change without notice.

Guarantee

If this product fails through faulty materials or workmanship, contact

our service department direct on: +44 (0) 1926 818186. Normal wear

and tear are excluded as are consumable items and abuse.

Distributed by The Tool Connection Ltd

Kineton Road, Southam, Warwickshire CV47 0DR

T +44 (0) 1926 815000 F +44 (0) 1926 815888

info@toolconnection.co.uk www.toolconnection.co.uk

www.lasertools.co.uk

Belt Tension Gauge

Instructions

• The use of advanced technologies make this lightweight tension gauge both

convenient to use and simple to operate. Its ruggedness will allow many years

of use if the correct operating techniques are followed. Please read the following

instructions carefully and always keep this manual with the machine for reference.

• For specific belt tension settings always refer to the vehicle manufacturers data.

www.lasertools.co.uk

5846

Need help?

Do you have a question about the 5846 and is the answer not in the manual?

Page 1 5846 Belt Tension Gauge Instructions Specifications subject to change without notice. • The use of advanced technologies make this lightweight tension gauge both Guarantee convenient to use and simple to operate. Its ruggedness will allow many years If this product fails through faulty materials or workmanship, contact of use if the correct operating techniques are followed.
Page 2 Contents Calibration Procedure A feature of the Laser 5846 is its ability to be Introduction Page No. easily recalibrated by the user. The Digital Belt Tension Gauge is a professional instrument that offers a highly accurate A calibration test-belt rig is set up using a method of measuring and adjusting the tension of all types of rubber timing and auxiliary fixed and known weight (2).
Page 3 This is normally TDC on the compression stroke on Measuring head weight 230g number one cylinder. Refit the 5846 and re-test. Optional: USB Cable and software. Note: If at any time whilst tightening the clamp, the coloured LED goes off, the beeper sounds continuously and the message INF1 appears on the display, stop tightening the clamp immediately or the measuring head will be damaged.
Page 4 Controls and Indicators How to Set the Low Limit or the High Limit: Refer to diagram: the handset has a LCD (liquid crystal) display, one colour coded If required, after referring to the manufacturer’s belt tension specification, the lower and indicator LED (E), a beeper, and a keypad with 3 keys.