• DO NOT route cord under furniture or appliances. Arrange cord away from traffic IMPORTANT WARNINGS area and where it will not be tripped over. Failure to comply with the warnings listed below may • If the supply cord is damaged it must be replaced by the manufacturer, its service result in electric shock or serious injury.
Runback Timer: 1.2.4 and 8H selectable with digital temperature display. Control panel 、 LED display: ON/OFF, wind speed, wind modes, oscillation. 、 Remote control. Simple and easy to use remote control with on board storage.. 、 P ART DIAGRAMS 、 、 、 、 Product Structure Display panel 4.
Page 4
● OPERATION INSTRUCTION: hours or 8 hours, the selected period will be indicated by its LED light which will Note: When the product is plugged in a double ‘BEEP’ sound will confirm that the remain on for the selected period, when the selected operating time has run out the product is correctly connected to the mains supply and the product is in STANDBY product will switch off automatically and go into standby mode until the user needs MODE.
The specific program waveform graph for each Natural Blower Mode is shown Note - Remote Control will only operate the product if it is in direct line of site and below for each of the 3 speed selection modes (HI, MED, LOW within a distance of 6 meters from the product.
Your product is guaranteed for 1 year from the date of purchase. If you experience product when not in use for a long time. a problem with our Xpelair product, which is found to be defective due to faulty Store in a dry and well ventilated space when not in use to prevent moisture materials or workmanship within the Guarantee Period, this Xpelair Guarantee will ingress which might cause the product to malfunction or fail.
Page 7
You must provide to Xpelair or its authorised agents on request the original receipt Any fault or damage occurring to any pre-owned Xpelair product or to any other as proof of purchase and - if required by Xpelair - proof of delivery. If you are equipment or property.
Need help?
Do you have a question about the XPSS and is the answer not in the manual?
Questions and answers