SmartPay PAX S920 Getting Started Manual

Thank you for choosing Smartpay
The S920 is a secure, stylish and mobile payment terminal. It connects to the internet via a GPRS/3G data sim card or Wi-Fi.
Complete these simple steps to get your terminal
connected, ready to take a payment.
STEP ONE: Switch on
Turn on the terminal by holding the
The terminal will go through a start up sequence.
STEP TWO: Connect to the Paymark network
Your terminal arrived with a printed receipt still attached:
1. If the receipt is a short receipt with your business name on it,
you are now all ready to go.
2. If not, you'll need to call us before you can connect. Call
Smartpay Technical Support Team on 0800 476 278. We will
release the security key and perform your initial logon.

Charging the terminal

You can charge the terminal by plugging it into the power. On mains power with the charging accessory provided it will take approx.
3 hours for a full charge. You can also use a standard USB car charger with micro USB cable to charge the terminal while you're on the
go. There is a mains powered charging cradle accessory available depending on your needs. Please Contact our team on 0800 476 278
if you would like to order this.
Now you're all ready to take payments Flip this card over for the Quick Reference
Guide which tells you how to perform key functions in standalone mode.
Integrated EFTPOS?
If you are integrating your terminal with your Point of Sale (POS) or
Electronic Cash Register (ECR), the idle screen will display the interface
mode (rather than the idle screen as shown on the reverse of this guide).
Please refer to the Integration Set Up Guide included with your
terminal.
To download the full user guide visit smartpay.co.nz/guides
This contains instructions on care for your terminal, loading
paper and full functionality details.
Getting Started Guide |
button on the terminal.
Smartpay PAX S920
What's in the box
*
S920 Terminal
Charging cable
base unit
*If this is a replacement terminal you may need to use the
cables from your existing terminal.
Pre-loaded
paper roll
Need help?
Get help online at: smartpay.co.nz/help
View the full user guide for your terminal at:
smartpay.co.nz/guides
Call our Technical Helpdesk on 0800 476 278.
Contact your bank to enable/disable card types, electronic
vouchers (offline mode), contactless
Contact Paymark to change your business name on your receipt
(GPRS)
Sim card Return courier
(installed) label