Connecting Hdmi Equipment; Displaying An Image From Hdmi Equipment; Selecting Hdmi Audio Input Source; Using Digital Audio Output - Sharp Aquos LC 20DV20U Operation Manual

Using external equipment

Connecting HDMI equipment

You can use the INPUT4 terminal when connecting HDMI equipment.
When using an HDMI-DVI conversion cable, use INPUT4 and AUDIO terminal.
Displaying an image from HDMI
equipment
To watch an HDMI equipment image, select
1
"INPUT4" from "SOURCE SELECTION"
menu using INPUT on the remote control
unit or on the TV. (See page 19.)
SOURCE SELECTION
0. TV
1. INPUT1
2. INPUT2
3. INPUT3
4. INPUT4
5. INPUT5
[0-5]:SELECT
NOTE
• Refer to your external equipment operation manual for
the signal type.

Selecting HDMI audio input source

Press TV MENU and the MENU screen
1
displays.
2 Press / to select
Press / to select "HDMI".
3
20
It is possible to output audio through the COAXIAL
DIGITAL AUDIO OUTPUT terminal in DVD mode
only. PCM audio outputs from the terminal.
(AUDIO).
• Even when the TV is not in DVD mode, the audio may be
Press / to select "HDMI" or "DVI".
4
AUDIO
MTS

BASS

TREBLE

BALANCE

SURROUND

HDMI

RESET
:SELECT
HDMI: When you connect the HDMI device to
the TV, select this setting.
DVI: When you connect the DVI device to the
TV with analog audio cords, select this
setting.
Press EXIT to return to the normal screen.
5

Using digital audio output

Coaxial digital cable
To coaxial digital input of
external audio devices
NOTE
output through the COAXIAL DIGITAL AUDIO OUTPUT
terminal depending on the DVDs.
HDMI cable
(Commercially
available)
HDMI
equipment
STEREO
25
25
0
OFF
HDMI/DVI
►
:ADJUST