Table of Contents
Advertisement
6.1 Alarm Prompt
Message
Dust container not installed
Please check whether the
wheels are jammed
Please check whether the front
is jammed
Low battery,Please
charge this robot
Please check if the brush is
wound or jammed
Please move the machine to
the open area and press the
cleaning key for cleaning
Failure Cause
Dust Container was taken out and
not installed
The wheels holder is blocked
up
The front holder is stuck
Less than 20% power left
Brush edge issues
The machine failed to recover
Solution
Pack the filter back into the
dust container and press the
cleaning key
Check whether the wheel has
been wound and clean it up
Check if the front holder can
rebound itself normally
The machine automatically
enters the recharge mode
Check if the brush is entangled
by wire/cable and clean up
Move the vacuum to the
spacious area and press the
cleaning button
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Robot Vacuum and is the answer not in the manual?
Questions and answers
machine says "machine fai...: then cuts off. tesvor m1
When the Tesvor M1 robot vacuum displays "machine fai..." and then shuts off, it likely means the machine failed to recover. This can happen if the vacuum is stuck or unable to operate in its current location. The recommended action is to move the vacuum to an open, spacious area and press the cleaning button again.
This answer is automatically generated