Installing A Preloaded Tune File - SCT Livewire TS+ User Manual

3.1 INSTALLING A PRELOADED TUNE FILE

1. Connect the Livewire TS+ to your vehicle's OBD II port
and power on the device by pressing down on the power
button in the upper right hand corner of the device as you
are looking at the screen.
2. Start with the unit powered on and connected to the
vehicle, press the "Program Vehicle" button on the screen.
3. Next you will be prompted with a "Street Use Notice"
which you must agree to and approve to begin tuning. If
you approve and agree press the "Continue" button on the
screen to proceed.
4. You may be prompted to "Turn Key On". If so, please turn the
ignition key to the "On" position but do not start the vehicle.
5. A screen will appear asking you to select your vehicle.
Touch the menu item that contains your vehicle.
6. Next you will be prompted to adjust options. These options
are items available from SCT to make minor adjustments
to the calibration being loaded. It is not necessary to
make adjustments in this area. If you wish to make an
adjustment, simply press the option you would like to
change and the screen will change to display the available
values for that option. When you are satisfi ed with the
values of these options or if you do not wish to change
them, touch "Approve".
7. You will now be prompted with a screen to review your
vehicle and options Press "Continue".
8. The next screen, possibly two, will diff er between vehicles.
You will be prompted to "Turn key Off " and/or "Turn Key On".
It's important here to follow the prompts from the device.
9. Livewire TS+ will now upload the current fi le that is in your
vehicle, referred to as the "Stock File", and will proceed to
download the new calibration you have selected with all
options applied.
10. After this is complete the device will display a "Download
Complete" screen. You can now turn the key to the off
position. GM vehicles may see a "Power Down ECU" screen
while the vehicle completes some power down procedures.
11. The installation process is now complete.
SECTION 3: PROGRAMMING YOUR VEHICLE
9