Table of Contents
Advertisement
Putting the device into operation
11. With your fingernail or a suitable object
move the flap about 2 mm to the right
(in the direction of the arrow) until you
can feel it click into place.
12. Now the SIM card holder is locked into
position.
13. Check the connection of the internal IO
connection cable.
Finally re-attach both housing parts:
Slide the motherboard into the rails on
top and bottom inside the rear section
of the housing. Close the housing by
slightly pressing the housing parts
together so that the clamps on the
upper and lower parts of the housing
engage.
The housing is locked when all clamps
have clicked shut.
18 von 105
SINAUT MD740-1
Advertisement
Table of Contents
