Getting To Know Your Elemnt Rival - Wahoo ELEMNT Rival Quick Start Manual

3. Select "Start" to proceed with pairing the companion app to your ELEMNT Rival.
4. If not turned on already, turn your ELEMNT Rival on by pressing the upper left hand
button.
5. Pair your ELEMNT RIVAL with your smartphone by scanning the QR code displayed
on the ELEMNT BOLT. (Simply place the ELEMNT RIVAL in front of your phone
camera.)
NOTE: The ELEMNT companion app requires access to the camera in order to
scan the QR code. Please enable access to the camera if prompted.
6. The ELEMNT companion app will now display the login page. Log in by signing up
to the Wahoo Fitness Cloud to proceed.
NOTE: Login is necessary to backup your data and sync between devices. This
step can be skipped, but will be required in order to view your data on other devices.
7. Turn Bluetooth on to enable the ELEMNT RIVAL essential services such as update
of your device and to upload workouts.
8. Log in to your favorite fitness sites and ELEMNT RIVAL will automatically upload
your workouts over bluetooth. Alternatively, select Next and add these later.
9. Complete a basic profile to be used with the ELEMNT BOLT. This information will be
used to calculate metrics such as calories and HR zones. Alternatively, select Next and
add these later.
10. Enable Live Track if desired to allow you to see other riders on the ELEMNT RIVAL
and allows other ELEMNT users to see you. Additionally, you can also share a link with
family and friends to view your location online.
11. If you choose to enable Live Track, you can also automatically share your location
with others. Add recipients via email to continue or select Next.
After initial installation, the ELEMNT RIVAL will perform a step-by-step tour. Read up on
how to use or select "Skip tour" to exit. Your ELEMNT RIVAL is now set up and ready
for action.

Getting to Know your ELEMNT Rival:

The ELEMNT RIVAL interface consists of the following buttons:
How to find E-label
Hold down "menu" button (bottom left).
Select "System"
Select "Certifications"