Important Safety Instructions; Appropriate Use; Technical And Electrical Safety - Miele PM 1210 Operating Instructions Manual

Please read these operating instructions supplied with the rotary iron before using it for
the first time. They contain important information on the safety, use, and maintenance of
the rotary iron.
This prevents both personal injury and damage to the appliance.
If other persons are being shown how to operate the rotary iron, they must be given
and/or informed of these important safety instructions.
Keep these operating instructions in a safe place and pass them on to any future user.

Appropriate use

This rotary iron must be used as described in these instructions and must be checked on a
regular basis to make sure it is functioning correctly. Maintenance must be carried out
when necessary.

This rotary iron is only intended for ironing fabrics that were washed in water. Check
fabric care labels to verify that the articles are suitable for machine ironing.

This rotary iron is intended for use in commercial settings. It is not intended for domestic
use. If the rotary iron is operated in a publicly accessible place, it is the supervisor's re-
sponsibility to ensure suitable measures are in place to protect users from any source of
risk or danger.

This rotary iron is not intended for outdoor use.

Technical and electrical safety


Do not operate the rotary iron in a room where cleaning machines operate with solvents
containing PERC or CFC.

The rotary iron should only be operated in a suitable dry room.

Only operate the rotary iron when all removable outer casings are in place so that it is
impossible to touch an electrical, moving, or heated component.

Do not damage, remove or bypass the safety components or control elements of the ro-
tary iron.

Do not make any alterations to the machine, unless authorized to do so by Miele.

If the controls or the electrical cabling insulation has been damaged, the rotary iron must
not be used until it has been repaired.

Repair and maintenance work should be performed by a Miele-authorized service tech-
nician. Work by unqualified persons could be dangerous.

Defective components should be replaced by Miele original parts only. Only with original
Miele parts can the manufacturer guarantee the safety of the appliance.

Make sure this appliance is properly installed and grounded by an authorized technician.
For electrical safety, this machine must be grounded. It is imperative that this basic safety
requirement be tested by a qualified electrician. Consult a qualified electrician if in doubt.

The appliance is completely isolated from the electrical supply when it is turned off at
the main switch or the circuit breaker has been "tripped."

IMPORTANT SAFETY INSTRUCTIONS

5