Helpful Functions Set During Installation ("Prj-Adj" Menu); Auto Power Off Function; Auto Restart Function; Setting The Confirmation Sound (System Sound) - Sharp Notevision XG-C435X-L Operation Manual

Helpful Functions Set during Installation ("PRJ-ADJ" menu)

Pict. SIG SCR
1
Auto Power Off
2
Auto Restart
3
System Sound
4
Speaker
5
Audio Out
6
Monitor Out
7

LAN/RS232C

8
RS-232C
9
Fan Mode
0
System Lock
q
All reset
w
Lamp Timer (Life) [
SEL./ADJ.
RETURN
1 1

1 Auto Power Off Function

1 1
Selectable items
The projector automatically enters the
On
standby mode when no input signal is
detected for 15 minutes or longer.
Off The Auto Power Off function will be
disabled.
Note
• When the Auto Power Off function is set to "On",
5 minutes before the projector enters the
standby mode, the message "Enter STANDBY
mode in X min." will appear on the screen to
indicate the remaining minutes.
2 2 2 2 2

Auto Restart Function

Selectable items
On If the power cord is unplugged from the
outlet or the breaker switch is turned off
when the projector is on, then the
projector automatically turns on when
the power cord is plugged into the AC
outlet or the breaker switch is turned on.
Off The projector does not turn on auto-
matically when the power cord is
plugged into the AC outlet or the
breaker switch is turned on.
3 3 Setting the Confirmation 3
3 3
Sound (System Sound)
Selectable items
On A confirmation sound is made when the
projector turns on/off.
Off No confirmation sound is made.
PRJ-ADJ Net.
On
On
On
On
FAO
Enable
Enable
9600bps
Normal
Disable
0]h [ 0] min ( 100%)
ENTER
END
Description
Description
Description
Menu operation
4 4

4 Speaker Setting

4 4
This function allows you to set the audio output
of the internal speaker to "On" or "Off" such as
when the projector is connected to an external
amplifier.
Selectable items
On The audio signal is output from the internal
speaker.
Off The audio signal is not output from the
internal speaker.

5 Audio Output Type Setting

5 5
5 5
This function determines whether the audio level
output from the AUDIO output (MONITOR output)
terminal is fixed or variable by linking with VOL-
UME.
Selectable items
FAO Audio output that does not vary in
(Fixed Audio strength with the volume level of the
Output)
source projector.
VAO Audio output that varies in strength with
(Variable the volume level of the source projector.
Audio Output)
Info
• When "Audio Out" has been set to "VAO", first make
sure to lower the volume of the projector before
turning the power on or off and when switching the
input.

6 Monitor Output

6 6
6 6
7 LAN/RS232C 7 7
7 7
When set to "Enable", the function is activated
and power is consumed even in the standby mode.
It is recommended that the function be set to "Dis-
able" when it is not connected. This reduces power
consumption when the projector is in the standby
mode.
Selectable items
Enable The function is activated even if the
projector is in standby mode.
Disable The function is switched off when the
projector is in standby mode.
Note
• When you want to control the projector using
the LAN/RS232C function, select "Enable".
Page 43
Description
Description
Description
-51