Table of Contents
Advertisement
Quick Links
Published on Hunter Industries (http://www.hunterindustries.com)
Home > How do I reset my Hunter controller?
Product Lines:
Controllers
,
[1]
Discontinued Models
Products:
X-Core,
[3]
XC,
[4]
Pro-C,
[5]
PCC,
[6]
SVC,
[7]
ACC,
[8]
EC,
[9]
Node,
[10]
SRC / SRC Plus,
[11]
ACC-99D Decoder
Topics:
FAQs, Video
Note: All Hunter controller's must be in the Run position to reset.
SRC
1. Unplug the controller's transformer.
2. Press and hold down the
3. Plug the controller's transformer back in.
4. Release the
12:00am. All the memory has been cleared and the controller may now be
reprogrammed.
SRC Plus
1. Press and hold down the
2. Press and release the RESET button in the lower wiring compartment.
3. Release the
12:00am. All the memory has been cleared and the controller may now be
reprogrammed.
EC
1. Press and hold down the
2. Press and release the RESET button in the lower wiring compartment.
3. Release the
12:00am. All the memory has been cleared and the controller may now be
reprogrammed.
[2]
[12]
,
and
,
and
,
and
,
and
buttons.
buttons. The display should now show
,
and
buttons.
buttons. The display should now show
,
and
buttons.
buttons. The display should now show
Advertisement
Table of Contents
Related Manuals for Hunter SRC
Summary of Contents for Hunter SRC
- Page 1 [11] ACC-99D Decoder [12] Topics: FAQs, Video Note: All Hunter controller's must be in the Run position to reset. 1. Unplug the controller's transformer. 2. Press and hold down the buttons. 3. Plug the controller's transformer back in. 4. Release the buttons.
- Page 2 X-Core 1. Press and hold down the buttons. 2. Press and release the RESET button on the right side of the controller. 3. Wait 2 seconds and release the buttons. The display should now show 12:00am. All the memory has been cleared and the controller may now be reprogrammed.
- Page 3 1. Press and hold the Programs button, and at the same time press in the recessed Reset button with the tip of a ball point pen. 2. Release the Reset button and continue holding the Programs button until the Reset Memory screen appears (then release the Programs button). The display will show the following Reset options: Programs: Erases Day schedules, start times, and run times.
Need help?
Do you have a question about the SRC and is the answer not in the manual?
Questions and answers